Moxie was started by Andrew Stuber in 2015 to help provide riders a cost effective way to customize their ride or helmets. The dream is to one day offer a curated riding gear boutique as well as full custom bike designs. He has spent the better part of the last decade as a designer/art director, but motorcycles and cars have always held a place in his heart.
We work with automotive/outdoor vinyl from 3M, Vvivid, and Orafol. All are rated for 8+ years when properly taken care of.
Should the graphics fail from our installation error we will replace it.
We have access to a variety of colors and finishes, Matte - Gloss - Carbon - Prismatic, note what you are looking for and we will be sure to get the desired color
Check out things we've done
All pricing includes installation
Small Decal (2-3").........$10
Large Decal (4-5").........$15
Keeping it clean:
Wash whenever they appear dirty
- Rinse off as much dirt and grit as possible with a spray of water
- Use a wet, non-abrasive detergent Meguiar’s Car Wash
- Wash and a soft, clean cloth or sponge
- Rinse thoroughly with clean water. To reduce water spotting, immediately use a silicone squeegee to remove water and finish with a clean microfiber cloth.
Soften difficult contaminants such as bug splatter, bird droppings, tree sap and similar contaminants by soaking them for several minutes with very hot, soapy water
Buffing and Waxing:
We do not recommend using wax or other similar coatings on the graphics
Do not use mechanical items like a buffing wheel
Wipe fuel spill off immediately to avoid degrading the vinyl and adhesive. Then wash, rinse and dry as described above